MAKITA 18V Cordless 13mm Hammer Drill Driver DHP490Z / DHP490WVE / DHP490SFX1
The Makita DHP490 is a Combi Drill powered by an 18V LXT Li-Ion battery. This model ensures sufficient torque by adopting a Brushless Motor is lightweight and compact, easy to handle even in narrow spaces. Features and Benefits: Maximum torque of 65Nm, Mechanical 2 speed, Electric brake, Variable speed control by trigger. With its lightweight and compact design, the tool is easy to handle even in narrow spaces.
FEATURES:
-The brushless motor provides longer work hours per charge and extended tool life.
-Provides increased efficiency with the maximum no-load speed of up to 1,900 rpm.
-The 20-stage torque settings allow for fine adjustments to suit the task at hand.
-A mechanical 2-speed gearing allows for choosing between maximum rpm or higher torque.
-Three action modes are available: Drilling, Hammer drilling, and Screwdriving.
-A single LED light with pre-glow and after-glow functions illuminate the work area.
-The variable speed trigger allows for speed adjustments based on the material or application.
SPECIFICATIONS:
– Capacity: Masonry: 13 mm (1/2″) | Steel: 13 mm (1/2″) | Wood: 38 mm (1-1/2″)
– Max Torque: 65 N·m (580 in.lbs)
– Max Output: 460W
– Chuck Capacity: 13 mm (1/2″)
– Impacts Per Minute (IPM): High: 0 – 28,500 | Low: 0 – 7,500
– Max Fastening Torque: Hard: 50 N·m (440 in.lbs.) | Soft: 27 N·m (240 in.lbs.)
– No Load Speed (RPM): High: 0 – 1,900 | Low: 0 – 500
– Dimensions (L x W x H): 172 x 81 x 237 mm (6-3/4 x 3-3/16 x 9-3/8″)
– Net Weight: 1.4 – 1.7 kg (3.1 – 3.7 lbs)
AVAILABLE OPTION:
Z – Solo Set: Without Charger & Battery
W/Battery & charger Set: (LXT Basic) 1 x BLB182 2.0Ah Battery, 1 x DCB18WA Standard Charger
WVE – Full Set: (LXT Basic) 1x DCB18WA Standard Charger, 2x BLB182 2.0Ah Battery, With Carrying Case
SFX1 – Full Set: 1x DC18SD Standard Charger, 1x BL1830B 3.0Ah Battery, Makita Tool Bag
Warranty Info
🔒Makita Warranty Information (Malaysia Only)
✅ Warranty Coverage
-12 Months Warranty on all Makita tools, batteries & chargers
-6 Months Warranty for Heat Guns
-Proof of purchase (invoice with serial number) required
-Repairs or replacement are carried out free of charge at Makita Authorized Service Centres
🚫 Warranty Exclusions
Warranty is void if:
-Tool shows normal wear & tear (e.g. brushes, gears, blades, bits)
-Non-genuine parts, unauthorized repairs, or modifications are used
-Tool is overloaded, misused, or not maintained properly
-Used with abnormal voltage or incompatible generators
-Serial number is missing or tampered
-No proof of purchase is provided
🆓 Extended Warranty (XGT & LXT Tools Only)
✔️ Additional 1-Year Free Extended Warranty
📌 Register online within 30 days of purchase, while this promotion is on-going until further notice
Steps to Register:
-Purchase Makita XGT or LXT tool
-Fill out online registration form
-Upload invoice with serial number
-Submit and wait for email confirmation
📄 Bring both original invoice & online warranty confirmation when visiting Makita Service Centres.
Warranty valid for Makita Malaysia products only.
Makita reserves the right to amend terms without notice.