Samurai Spray Paint Top Coat MC101 Clear Fine / K1K Clear Lacquer Transparent Motorcycle Paint Spray Cat semburan jernih coating motor 摩托喷漆
**No Delivery to East Malaysia. Aerosol products will be rejected at airport. **
SAMURAI® 1K clear coat is the paint used for completion of the painting industry. Uniquely (without hardener) to build a solid layer and thus protect all types of coated surface.
SAMURAI® focuses on motorcycle repainting business as well as aftermarket. Its products give the best finishing from custom painting to the original motorcycle colours painting. It is an advance spray paint formulation specially made for DIY fanatics to get the best finishing to the wide range of surfaces.
The unique formulae of SAMURAI® are well in line with the advanced technology of Development Team, which focus on attaining fulfillment from creativity and innovation.
Samurai Spray 101 MC Clear (Fine) – 400ml
– Use on solid & motorcycle colours / Metal & Plastic
• Non-yellowing
• Non-cracking
• Non-tearing
• Good adhesion
• Excellent coverage
Samurai Top Coat K1K Clear – 300ml
– Use on Metallic & Motorcycle colours to give excellent gloss
Car Headlight Restoration Guide:
- Spray a thin layer of Samurai K1K.
- Apply second thin layer after 10 minutes.
Product Features:
- Nozzle can be rotated vertically or horizontally.
- Strong adhension to the surface.
- Extra glossiness and provide maximum shine.
- Guaranteed non-crack.
- Protected from petrol and engine oil.
- Weather resistant.
Directions for use:
1. Remove grease, dirt, rust, moisture or loose paint from the surface to be sprayed. Cover adjacent areas to protect from spray mist.
2. Shake can vigorously until metal agitator, moves freely for 1 minute. Remove plastic cap.
3. Hold can from a distance of 6-8″ and point nozzle towards object to be sprayed.
4. Press nozzle firmly and move spray back and forth to deposit an even film of paint.
5. Clean nozzle immediately after use by turning can upside down and pressing nozzle for 5 seconds or until no more paint emerges.
6. If clogging develops, pull nozzle off and clean with thinner. Gently replace nozzle with a twisting motion while holding can away from you.
NOTE: Colours shown here are as close to actual paint colours as modern printing technique allow. Due to different computer monitors/calibrations colours may vary slightly from the picture.