MAKITA 18V Cordless 13mm Hammer Drill Driver 141Nm DHP486Z DHP486RTE
The 18V Brushless Hammer Driver Drill (DHP486) provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.
FEATURES:
– Increased performance in continuous heavy-duty applications
– Increased max clutch torque enables to adjust clutch torque even when tightening fasteners into hard material
– Compact and ergonomic design at only 178 mm long
– 0-31,500 IPM for fast hammer drilling in masonry materials
– BL motor delivers 125 N·m of max torque
– All metal variable 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
– All metal gears and gear housing for maximum job site durability
– All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability
– 21 clutch settings and drill mode for added fastening control
– 3-stage LED gauge indicates battery charge level
– Twin LED lights with afterglow feature illuminate the work area
SPECIFICATIONS:
– Capacity: Siding Board: 170 mm (6-11/16″) | Wood (Auger-Bit): 50 mm (2″) | Wood (Hole Saw): 152 mm (6″)
– Max Torque: 141 N·m (1,250 in lbs)
– Impacts Per Minute (IPM): High: 0 – 31,500 | Low: 0 – 8,250
– Max Fastening Torque: Hard: 130 N·m (1,150 in. lbs.) | Soft: 65 N·m (580 in. lbs.)
– No Load Speed (RPM): High: 0 – 2,100 | Low: 0 – 550
– Dimensions (L x W x H): 178 x 81 x 265 mm (7 x 3-3/16 x 10-3/8″)
– Net Weight: 2.3 – 2.7 kg (5.1 – 6.0 lbs.)
– Work Amount (approx.): 710 holes with BL1850B – Wood bit Ø 21 mm (30 mm thick Melapi) High Speed
STANDARD EQUIPMENTS:
Depth Gauge, Side Handle, Belt Clip, (+)(-) Bit, Bit Holder
AVAILABLE OPTION:
Z – Solo Set: Without Charger, Battery & Carrying Case
W/Battery & Charger Set: 1x DC18RC Rapid Charger, 1x BL1860B 6.0Ah Battery
RTE – Full Set: 1x DC18RC Rapid Charger, 2x BL1850B 5.0Ah Battery
Warranty Info
🔒Makita Warranty Information (Malaysia Only)
✅ Warranty Coverage
-12 Months Warranty on all Makita tools, batteries & chargers
-6 Months Warranty for Heat Guns
-Proof of purchase (invoice with serial number) required
-Repairs or replacement are carried out free of charge at Makita Authorized Service Centres
🚫 Warranty Exclusions
Warranty is void if:
-Tool shows normal wear & tear (e.g. brushes, gears, blades, bits)
-Non-genuine parts, unauthorized repairs, or modifications are used
-Tool is overloaded, misused, or not maintained properly
-Used with abnormal voltage or incompatible generators
-Serial number is missing or tampered
-No proof of purchase is provided
🆓 Extended Warranty (XGT & LXT Tools Only)
✔️ Additional 1-Year Free Extended Warranty
📌 Register online within 30 days of purchase, while this promotion is on-going until further notice
Steps to Register:
-Purchase Makita XGT or LXT tool
-Fill out online registration form
-Upload invoice with serial number
-Submit and wait for email confirmation
📄 Bring both original invoice & online warranty confirmation when visiting Makita Service Centres.
Warranty valid for Makita Malaysia products only.
Makita reserves the right to amend terms without notice.